STANDARD PUMP · BACK PULL-OUT
3M stainless-steel standard centrifugal pumps
3M is a stainless-steel standard pump range for domestic, civil and industrial water duties. The brochure identifies AISI 304 wetted parts, back pull-out construction and several hydraulic sizes, with AISI 316 indicated as an option on request.
Range technical data
- Power range
- 1.1–37 kW
- Maximum flow
- 240 m³/h
- Maximum head
- 72 m
- Discharge sizes
- DN32–DN80
- Electrical supply
- 3~ 380–415 V, 50 Hz
These figures describe the catalogue range or stated subrange. Maximum flow and maximum head/pressure are not a single duty point. Select the exact model from its curve and confirm materials, electrical version and connections.
Series catalogue ↗3M
A closer look at the series
The 3M catalogue presents an industrial-style centrifugal pump with AISI 304 stainless-steel wetted components. Its back pull-out construction permits access to the rotating assembly without removing connected pipework, as described by the source. The brochure lists square or round motor configurations and provides a model code based on discharge size, nominal impeller diameter and power.
It also notes that some impure liquids may be suitable, but this must be assessed against the exact solids characteristics and the selected pump. Use the catalogue curves and operating limits to choose the hydraulic size. Check motor supply, materials and seal details for the chosen configuration before specifying it.
Features
- AISI 304 wetted components
- Back pull-out construction
- Square or round motor configurations
- AISI 316 option stated on request
Applications
- Clean-water distribution
- Civil pumping systems
- Industrial water transfer
Materials
AISI 304 wetted parts, including pump casing, impeller and shaft; SiC/carbon/SS304 mechanical seal. AISI 316 construction is available on request, not a universal standard for the series.
Operating conditions
Liquid temperature −10 to +120 °C; ambient temperature 0 to +50 °C; maximum working pressure 16 bar; continuous duty S1. The overview lists three-phase 380–415 V supply.
Construction and application
Before selecting
- Select the 3M size and curve from the required flow and head.
- Check liquid and ambient temperatures and the 16 bar pressure limit.
- Confirm standard AISI 304 or requested AISI 316 and the electrical supply.
Your questions
Series questions
Is AISI 316 the standard construction?
No. The description specifies stainless steel 304 and lists AISI 316 on request. Confirm the ordered construction.
Can the pump be serviced without removing the pipes?
The brochure describes a back pull-out design and says pipe removal is not required for that access.
Original catalogue
3M / PDF
Start with materials and limits on page 1, then use the relevant 3M32/40/50/65/80 performance page on pages 2–6. AISI 316 is an option on request.
Related series
2CDX
2CDX stainless-steel twin-impeller pumps
2CDX is a horizontal centrifugal range with two impellers and AISI 304 hydraulic components. Its catalogue covers pressure boosting, water supply, treatment, irrigation and air-conditioning water circuits, with the twin-impeller arrangement providing a distinct duty profile from single-stage CDX.
CDX
CDX stainless-steel single-stage centrifugal pumps
CDX is a compact horizontal single-stage pump with axial suction and radial discharge. AISI 304 hydraulic parts and direct motor coupling define the range, which is presented for boosting, supply, treatment, irrigation and air-conditioning water circuits.
CM
CM close-coupled centrifugal pumps
CM is a close-coupled horizontal centrifugal range with axial intake and upward radial delivery. The catalogue covers several discharge sizes and impeller trims for industrial, agricultural and domestic clean-liquid duties, with cast-iron pump body and base support.