SUBMERSIBLE MIXING · MIXED MATERIALS
MIX submersible mixers
MIX is a submersible mixer for moving and agitating water in wastewater facilities and open-water settings. Its construction table combines cast components with stainless parts, distinguishing it from the all-stainless 4MIX series despite similar performance categories.
Range technical data
- Power range
- 0.4–2.2 kW
- Circulation capacity
- 108–408 m³/h
- Flow velocity
- 1.78–3.5 m/s
- Electrical supply
- 3~ 380–415 V, 50 Hz
These are mixer circulation and velocity data, not a pipe-transfer pump head curve. Check the selected model, basin geometry, liquid conditions and submerged installation.
Series catalogue ↗MIX
A closer look at the series
The MIX catalogue is a compact technical sheet for a submersible, dry-motor mixer. It lists wastewater treatment, river, pond and lake work, artificial water movement and agitation of impurities among the applications. Its construction table specifies cast-iron motor-related housings, a ductile-iron mixing impeller, stainless-steel jet ring and shaft, and a silicon-carbide mechanical seal.
The motor section identifies three-phase supply, submersible protection and built-in overload protection. MIX moves liquid within a basin; it is not a transfer pump with suction and discharge pipe connections. Select the mixer using the documented flow and velocity data, liquid temperature, installation arrangement and the actual geometry of the treatment zone.
Features
- Submersible dry-type motor
- Cast motor housings and ductile-iron impeller
- Stainless jet ring and shaft
- Built-in motor overload protector
Applications
- Wastewater-basin mixing
- Pond and lake water movement
- Agitation of impurities in water
Materials
FC200 cast components include the upper motor cover, bearing housing, bracket and inlet housing. The impeller is FCD450. Jet ring, shaft, motor housing and support base are SUS304; the mechanical seal is SiC/SiC and oil seal Viton.
Operating conditions
Liquid temperature 0–40 °C. Submersible dry-type motor, three-phase 380–415 V at 50 Hz, insulation class F and IP68 protection, with built-in overload protector. No pH or maximum immersion depth is stated in this MIX sheet. Check the series catalogue for the selected configuration.
Construction and application
Before selecting
- Match the required mixing duty to the listed model capacity and flow speed.
- Check liquid temperature and compatibility with FC200, FCD450 and SUS304 components.
- Confirm three-phase supply and the installation conditions for the chosen MIX model.
Your questions
Series questions
Is MIX an all-stainless-steel mixer?
No. MIX combines FC200 cast parts and an FCD450 impeller with SUS304 components. The separate 4MIX sheet has a different material schedule.
Can the 4MIX pH and depth limits be applied to MIX?
The MIX sheet does not state those limits. Check the series catalogue for the selected configuration; do not transfer limits from the separate 4MIX sheet.
Original catalogue
MIX / PDF
The single-page sheet gives mixing capacity and flow velocity, not a pipe-transfer head curve. Read its own material list; do not transfer the separate 4MIX pH/depth limits.
Related series
4MIX
4MIX all-stainless submersible mixers
4MIX is the all-stainless submersible mixer line described in the AQUARIS catalogue. It addresses wastewater mixing and artificial water movement while offering a construction material distinct from MIX, whose principal housings and impeller are cast.